Register Description
Product Reference Guide
17
BIN_ENABLE Register (RW)
Register Address Op. Default
BIN_ENABLE 0x10 RW 0x0001
The register is composed by the following fields:
Bit 15 ... Bit 2 Bit 1 Bit 0
BIN15_EN ... BIN02_EN BIN01_EN BIN00_EN
0 0 0 0 1 Default
BINX_EN Enable(1)/Disable(0) the counter for the corresponding histogram
bin.
BIN_ENA_SAMPLE Register (RW)
Register Address Op. Default
BIN_ENA_SAMPLE 0x11 RW 0xFFFF
The register is composed by the following fields:
Bit 15 ... Bit 2 Bit 1 Bit 0
BIN15_EN ... BIN02_EN BIN01_EN BIN00_EN
1 1 1 1 1 Default
BINX_EN: if the BINX_EN bit (X=0..15) is set to 1 all the sampled data values
which are in the range of bin X are saved into the logging memory. Default
condition is all flags set to 1.
BIN_ENA_TIME_STORE Register (RW)
Register Address Op. Default
BIN_ENA_TIME_STORE 0x12 RW 0x0000
The register is composed by the following fields:
Bit 15 ... Bit 2 Bit 1 Bit 0
BIN15_EN ... BIN02_EN BIN01_EN BIN00_EN
0 0 0 0 0 Default
BINX_EN: if the BINX_EN bit (X = 0..15) is set to 1 the timestamps (2 words -
Unix time format) of sampled values which are in the range of bin X are
saved into the logging memory. Default condition is 0 for all flags.
Example: In case both the sample valu
e and the sample time need to be
stored in the log area the sequence of the logged data in the memory is the
following:
To Next Page
Loading...