Page 7
Add Displays
Add Displays is available for displays with bezels or overlapable displays. Use the
“Displays Across” and the “Displays Up” to create your Display Group. Once
created, congure the displays using “What Type of Displays Do You Have?” When
using overlapable displays “Display Overlap” becomes available, enabling you to
select a percentage of overlap between displays.
What Type of Displays do you Have?
Use the “Manufacturer” and “Model” dropdown lists to select the displays you are
using for your wall. If the wall consists of dierent displays, select each one in turn
to congure the type of display. The DDCT has an extensive database of displays,
however if your display is not contained in the list, you can input the details manually
by selecting “Create Custom Display”.
It is strongly recommended that measurements are taken from the display
manufacturer’s specications if available.
Once the layout has been created and the type(s) of displays congured click on
“Add Displays & Continue” and the following dialogue is displayed:
To Next Page
Loading...
