1-2
Part No. 001-4008-101
1.3 INTEGRA-TR PART NUMBER BREAKDOWN
The following table provides a breakdown of the Integra-TR part number.
*An F should follow any part number to designate an Integra-TR with the cooling fan option.
1.3.1 TRANSCEIVER IDENTIFICATION
The transceiver identification is a random, unique serial number (SN) printed on the box label and model
label on the side of the Integra-TR unit.
1.3.2 ACCESSORIES AND OPTIONS
* For extended-transmit applications, the “TX Time out” timer must be turned off (set to “disable”) via the
Field Programming Software.
For information on accessories and options, contact your sales representative. In the United States phone
1-800-992-7774 or 1-507-833-8819, for International inquiries phone 507-833-8819.
Table 1-1 Integra-TR Part Number Breakdown
242-40W8-XYZ*
W X Y Z (UHF units)
1 VHF 0 406-422 MHz 0 6.25 kHz 0 406-422 MHz
4 UHF 1 380-403 MHz 1 12.5 kHz 1 414-430 MHz
9 900 MHz 2 403-419 MHz 3 25 kHz
3 419-435 MHz
4 132-150 MHz (VHF), 435-451 MHz (UHF)
5 450-470 MHz (UHF), 928-960 MHz (900 MHz)
6 150-174 MHz (VHF), 464-480 MHz (UHF)
7 480-496 MHz
8 496-512 MHz
Table 1-2 Accessories
Accessory DRL Part Number
Integra-TR Field Programming Kit includes software, technical manual on CD ROM
with programming cable (DRL part number 697-4008-408) 250-4008-001
SMA Male - BNC Female adapter cable 023-3410-098
*Cooling fan - factory option (For extended duty-cycle transmit applications) Catalog number plus “F” suffix.
Power cable 697-4008-001
Factory Mutual NI Kit 023-1000-200
Switching Power Converter (SPC) 250-0300-133
Demo Power Kit 250-0300-175
Data Interface Kit 250-0045-103
Data Diagnostic Kit 250-0005-105
Integra-TR DIN-rail Mounting Kit 250-5800-408
*Full-duplex base station - Y-cable option Contact Technical Service
VHF Antenna Kit Contact Sales Representative
To Next Page
Loading...
