21
SYSTEM SETUP
SYSTEM SETUP mode allows user to setup DN-60 for different type of
signal, or file system.
Menu Option Action taken
SET SIGNAL
TYPE
Where to choose HDV, DV-NTSC or DV-PAL signal
to be recorded.
When in DV mode, DN-60 will automatically detect
different DV signal format such as DVC-25, DVCPro-
50 or DVCPro-100, and change the recording setup
automatically.
SET FILE
SYSTEM
This option chooses the computer’s file system to
emulate, NTFS or FAT32. Note that FAT32 has a
2GB file size limitation so clips longer than 2GB are
split into approximately 2GB files with no frames
dropped. Note that the current selection will be
marked with an asterisk.
SET VOLUME
ID
When connecting to a computer in the HDD mode,
the disk will have for volume name DATAVIDEOxx.
This option sets the xx value. A useful feature when
connecting multiple volumes at the same time as
from a multi-shoot.
TIMECODE
DISPLAY
During recording and playback, this option chooses
to display either the Internal or the External time
code. Note that the current selection will be marked
with an asterisk.
SET
BATTERY
TYPE
Choose battery type for battery indicator
Table 9 SYSTEM SETUP
To Next Page
Loading...
