27
Warning: If power is interrupted while the recording is paused, all
clip numbers added during the current record session will be lost.
No content however will be lost. Future firmware upgrades may fix
this behavior.
Note: If power is interrupted while recording, up to two seconds of
the last video may be lost.
Recording
When recording, by selecting and entering MARK mode, then pressing
the knob while recording will start a new clip with no frames lost. Each
time a recording is started a new clip is created. Up to 97 clips can be
numbered in each bin.
Note: Recording is done in a bin. A clip is automatically started at the
beginning of the bin if the bin is empty or appended to the last clip in the
bin. A clip is never inserted between other clips in a bin.
Note: The minimum length of a clip is 2 seconds.
Stopping
It is best to stop a recording by selecting Stop and then press the knob
before turning power off.
Special Record Setups
Do elapsed time recording
In the Time-lapse Record menu, user has to specify the total time-lapse
cycle and then specify how many frames will be recorded during this
cycle. The minimal time-lapse cycle is 1 second. And the minimal frame is
1 frame.
Note: This option is not currently valid with HDV. Later firmware
upgrades may turn this function on.
To Next Page
Loading...
