Datavideo PD-2A - Product Specifications; General Device Features

PD-2A
QUICK START GUIDE
7
Specication
This table is a guideline for Datavideo products, if you are using products from other manufacturers please check
their voltage requirements carefully before connecting to the PD-2A.
Input
• AC input outlet: One AC input
• AC input voltage: 100 - 240VAC
• AC input current rating: 100 – 240VAC MAX 6.3A
• AC frequency: 50Hz or 60Hz
• DC input: One DC 12V, supports non-regulated DC
12V output
• DC input watt: 400W
Output
• DC Output: 12V±5%, 3A XLR DC Female Jack x 4
12V±5%, 5A XLR DC Female Jack x 2
12V±5%,10A XLR DC Female Jack x 2
(Two of the outputs can combine the rating become
one 12V±5%, 10A DC outputs)
• Sequential-On design of each DC output terminal
during power on stage by 1 second duration.
Datavideo Product Voltage Requirements
General
• Output Efciency: More than 80%
• DC Output Noise: +5%, -3%
• Chassis Ground terminal
• Embedded three units of heat sink Fan design
• Selectable of Auto/AC input switch
• AC overload protection, non-recovery fuse on the AC
input outlet
• DC overload protection, auto-recovery fuses on each
DC output terminal
• AC Power light switch indicator
• DC output LED indicators
• Operating Temperature: 0 to 40
°
C ambient
• Operating Humidity: 5% to 90% RH, Non-condensing
• Storage Temperature: -20 to 85
°
C
• Storage Humidity:5% to 90% RH, Non-condensing
• Size: 440*214*46 mm
• Weight: 4.9Kg
DC 12V 3A SE-500 / SE-600 / SE-2000 / DVK-300HD / ITC-100 / AM-100
DC 12V 5A HS-550 / HS-600 / HS-2000 / HS-2000L / SE-2800
DC 12V10A HS-2800 / SE-3000