User’s Manual
25
4. DETAILED DESCRIPTION OF THE COMMANDS
4.1. Setting the printer’s functional mode
Select / Cancel direct text printing mode
The command sets the printer to a mode, in which all lines
received are printed and not executed as a command. In the
“sticker labels” mode the margin between the labels is
skipped.
Format: @ n
Where n may be 0, 2, 3 or 4; 0 cancels this mode while the
other values sets the direct text printing mode using the
corresponding font number.
Setting the printing density
Offers the option to adjust the printing density depending on
the sensitivity of the paper and the character of the printed
information.
Format: Dn
n may have values from 0 to 15 where 15 sets the maximum
density possible. Setting higher density rates leads to slower
printing.
Example: D6
Sets the printing density to 6.
Select / Cancel condensed print mode
When condensed printing is selected, the white frame around
every text symbol is not printed. So the width of every symbol
becomes two dots smaller and more symbols per line can be
printed. The selected mode is memorized after switching the
printer off.
Format: jn
n=0 Normal print (default)
n=1 Condensed print
To Next Page
Loading...