Datel Action Replay - Updating Action Replay with new codes; Using your PSPs built-in browser; Using a PC; Put your PSP into USB mode

Acon Replay for PSP can be easily updated with new codes, either by
downloading them using a PC or directly through your PSP’s web browser.
Using your PSP’s built-in browser*
Load your PSP’s normal menu by pressing ‘Start’ then choosing ‘Exit to PSP
XMB’. Open your PSP’s web browser and visit www.pspar.com
When the page loads, use the on-screen interface to browse the available
games and codes, and then follow the links to download any codes you
choose. When prompted, it is important that you choose to download the
codes to the PSP/COMMON folder.
Using a PC
To download new codes using your PC, simply visit www.codejunkies.com,
choose your region and visit the codes/saves part of the site. Browse for
the codes you’re aer and follow the on-screen links to download.
Codes you download must be copied to the PSP/COMMON folder on your
Acon Replay memory card. To do this you can use either a memory card
reader on your PC† or a USB lead connected to your PSP with your PSP in
USB mode (see below).
Installing the codes
Codes added to the PSP/COMMON folder are automacally installed as
soon as Acon Replay is restarted. Any duplicate games are merged and
duplicate code names will have their codes overwrien.
*PSP firmware with built-in web browser and acve WiFi connecon required
† Card reader will need support for Sony™ Memory Sck™ or MicroSD
Put your PSP into USB mode
From inside Acon Replay, press the ‘Home’ buon and choose ‘Exit to PSP XBM’.
Next choose ‘USB Connecon’ from the ‘Sengs’ menu.