Datel Action Replay User Manual

Remove the baery from your
PSP.
Click your baery into the Acon
Replay Baery Enabler.
Before you use Acon Replay for the first me, you need to use the Acon
Replay Baery Enabler on your PSP baery.
Follow these steps (you only need to do this once):
Press the buon once so that the
light on the le is lit.
Return the baery to your PSP
and replace the cover.
IMPORTANT

Datel Action Replay Specifications

General

Manufacturer	Datel
Function	Cheat device, save game backup
Features	Cheat codes, save game management
Connection	Cartridge slot
Supported Media	Game cartridges, memory cards
Memory	Varies by model

Summary

The first time you use Action Replay

Remove the battery from your PSP

Step to detach the PSP battery for initial setup.

Click your battery into the Action Replay Battery Enabler

Connect the PSP battery to the Action Replay Battery Enabler device.

Press the button once so that the light on the left is lit

Activate the Battery Enabler by pressing its button until the indicator lights up.

Return the battery to your PSP and replace the cover

Reinstall the prepared battery into the PSP and close the compartment.

Quick Start Action Replay Basics

Never format your Action Replay memory card

Critical warning against formatting the memory card to maintain functionality.

Insert the special Action Replay memory card into your PSP

Instruction for inserting the Action Replay memory card into the PSP.

Switch on your PSP and wait for Action Replay to boot

Power on the PSP and allow the Action Replay software to load.

Insert the UMD with your game on and close the door

Load the game disc into the PSP's UMD drive and secure the door.

Choose the right game, pick the codes you want then press 'Start'

Select a game, choose desired cheat codes, and initiate the process.

Using Action Replay

Select a Game

Navigating and selecting a game title from the Action Replay list.

Select Codes

Enabling or disabling cheat codes for the chosen game.

Hiding / Un-hiding Games and Codes

Managing the visibility of games and codes within the interface.

Starting your Game

Launching the game with the selected codes enabled.

Turning codes on and off in-game

Before starting your game

Preparing game and code selections before launching.

Turning codes on and off

Activating or deactivating cheat codes while the game is running.

Updating Action Replay with new codes

Using your PSP's built-in browser

Downloading codes directly via the PSP's web browser.

Using a PC

Obtaining new codes using a personal computer.

Put your PSP into USB mode

Connecting the PSP to a PC for file transfer via USB.

Installing the codes

Copying downloaded codes to the correct PSP folder for installation.

Options / Upgrading

Gamelist screen

Settings related to filtering and managing the game list.

Codelist screen

Settings for managing and enabling codes within a game.

When you don't want to use Action Replay

Quick-booting to the PSP's browser menu

Bypassing Action Replay to access the PSP's standard menu.

Reverting your PSP battery to a standard battery

Restoring the PSP battery to its normal, non-Action Replay configuration.

Technical Support

Troubleshooting

Common issues and solutions for Action Replay problems.

Contact

Information for contacting customer support for assistance.