DAVID T21 - Vacuum Operation

6
Reclining the Handle
• Press the handle release pedal located
on the back of the vacuum with your
foot to recline the handle (Fig. 1).
On/Off Switch
• The power switch located on the
vacuum handle, is a three-way switch
(Fig. 2). The middle position is the “Off”
setting, the rear position is the “On”
setting and the forward position is for
“Maximum Power” (Fig. 3).
• Use the “Maximum Power” setting for
carpet cleaning. Use the “On” setting
for cleaning bare floors and throw rugs.
Always turn the vacuum cleaner to the
“Off” setting before unplugging it from
the electrical outlet.
Edge Cleaning
The edge cleaning feature provides
improved cleaning near walls and
stationary furniture. For maximum edge
cleaning, place the left side of the nozzle,
from the user’s perspective, against the
wall or stationary furniture.
Automatic Carpet
Height Adjustment
Your vacuum is designed with an
automatic self-adjusting nozzle. No
manual adjustments are required. The
height of the nozzle automatically
adjusts to the flooring surface. This self-
adjusting feature allows the nozzle to
float evenly over all flooring surfaces.
Bare Floor Cleaning
Your vacuum is equipped with a
squeegee on the bottom of the vacuum
to improve its effectiveness in cleaning
bare floors (Fig. 4). When cleaning
tile, hardwood, vinyl, etc., use the “On”
setting for best results.
This vacuum is intended for household use only.
Fig. 2
Fig. 1
Fig. 3
ON
OFF
MAX
POWER
Fig. 4
OPERATION