To Next Page
S
Scott ZamoraJul 29, 2025
What to do if Davis Instruments Weather Station display is blank?
- SSue GriffinJul 29, 2025
If the display is blank, the unit might not be receiving power. Check the power adapter connections and/or replace the batteries.
What to do if Davis Instruments Weather Station display is blank?
If the display is blank, the unit might not be receiving power. Check the power adapter connections and/or replace the batteries.
How to fix Davis Instruments Weather Station when the display locks up?
If the console “locks up”, reset it by removing AC and battery power, then restoring power. If this occurs frequently in an AC-powered console, plug the AC power-adapter into a surge suppressor.
Why does my Davis Instruments Weather Station display show dashes instead of weather data?
The display might show dashes if a reading has exceeded the limits indicated in the specifications table, or if calibration numbers may be causing readings to exceed display limits. Check calibration number and adjust if necessary.
Why does the inside humidity on my Davis Instruments Weather Station seem too high or too low?
Ensure the console is not near a humidifier or dehumidifier. Check the calibration number and adjust if necessary. Also make sure the console backlight is not on.
What to do if Davis Instruments Weather Station console is sluggish at low temperatures?
The console and display may not work below 32º F (0º C). Use an External Temperature sensor in low-temperature locations or install the console indoors.
General| Brand | Davis Instruments |
|---|---|
| Model | Vantage Pro2 Plus |
| Category | Weather Station |
| Language | English |
Details regulatory compliance and warnings for the device as per FCC rules.
Instructions on how to power the console using the AC adapter or batteries.
Covers essential steps like battery installation and connecting cabled stations.
Step-by-step guide to configuring station settings like time, date, and location.
Setting up active transmitters and configuring IDs for wireless station communication.
Configuring time, date, latitude, longitude, and time zone for accurate forecasting.
Setting elevation, wind cup size, rain collector, and communication parameters.
Accessing and displaying current weather data, units, and variables on the console.
Adjusting calibration offsets for temperature, humidity, and pressure for accuracy.
Setting up, configuring, and clearing various alarm thresholds for weather events.
Displaying and analyzing weather data through various on-screen graphs.
Comprehensive guide to diagnosing and resolving common console and sensor issues.
Using console screens to monitor data reception and system status for optimal performance.
