Graph Mode
34
2. Select the alarm setting you wish to clear.
3. Press 2ND, then press and hold CLEAR until the setting changes to all
dashes.
You have cleared the alarm setting.
4. Press DONE to exit Alarm Mode.
Silencing Alarms
1. Press DONE to silence an alarm when it sounds.
Vantage Pro Station Alarms
Graph Mode
The Vantage Pro2 console includes a powerful Graph Mode that allows
you to view over 100 graphs of different kinds right on the screen, all with-
out connecting to a personal computer.
Variable Alarms
Barometric Pressure Trend
Storm Warning - uses trend value rising rate
Storm Clearing - uses trend value falling rate
Evapotranspiration ET Alarm - uses total ET for the day
Humidity, Inside High and Low
Humidity, Outside High and Low
Dew Point High and Low
Leaf Wetness High and Low
Rain
Flash Flood Alarm - uses current 15 minute rainfall total
24 Hour Rain Alarm - uses current 24 hour rainfall total
Storm Storm Alarm - uses current storm rainfall total
Rain Rate High
Soil Moisture High and Low
Solar Radiation High
Inside Temperature High and Low
Outside Temperature High and Low
Extra Temperature High and Low
Heat Index Temperature High
THSW Index Temperature High
Wind Chill Temperature Low
UV Radiation Index High
UV Radiation MED High - uses the current total if variable has been reset
Wind Speed High
Time & Date Yes - the alarm sounds for 1 minute.
To Next Page
Loading...
Need help?
General
