4. Touch timer control again, then “0” will flash.
5. Set the time by touching the slider control, (e.g.2), now the timer you set is
25 minutes.
6. When the time is set, it will begin to count down
immediately. The display will show the remaining
time.
7. Buzzer will bips for 30 seconds and the timer indicator
shows “- - “ when the setting time finished.
Using the timer to switch off one or more cooking zones
1. Touching the heating zone selection control that you
want to set the timer for.
2. Touch timer control, the “00” will show in the timer
display. and the “0” flashes.
3. Set the time by touching “+”“-”. (e.g.5)
4. Touch timer control again, the “0” will flash.
5. Set the time by touching “+” “-” (e.g.2), now the timer you set is 25 minutes.
32
www.elektromarkabolt.hu
To Next Page
Loading...