15
Circuit Breaker
To prevent surges that may damage the unit, the Boomerbeast comes with a circuit breaker.
This is located underneath the seat just above the controller.
There is a blue switch that in the event of a surge will trigger and turn the whole unit o .
In the event that your unit does
not turn on at all (the display
does not light at all once the
key is in the ignition) it is most
likely that the circuit breaker
is set to o . Open the seat lock
(see previous page for where
the lock is located) and switch
this switch to on.
On the Boomerbeast D model
you will have two circuit break-
ers. Both must be on to have full
power to the unit.
Accessing the controller / circuit breaker
Behind the seat you will nd two bolts that lock the seat rest to the machine. Using an Allen
Key, unscrew the two bolts seen below and lift the bar up to access the under seat compart-
ment.
*PLEASE NOTE* This is area is not meant to be used for storage.
To Next Page
Loading...
Need help?
General