EasyManuals Logo

Daymak BOOMERBEAST 2.0 STANDARD User Manual

Daymak BOOMERBEAST 2.0 STANDARD
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
Charging the unit
After using your Boomerbeast, you will need to charge the unit. The Boomerbeast comes with a charger
that you can use to plug into a regular outlet. (The deluxe unit charger looks di erent slightly but functions
the same way).
If you are sitting on the Boomerbeast on underneath the seat between your legs you can  nd the charging
port.
When the charger is plugged in the wall and not into the
unit the light will appear green. Then plug the charger into
the charging port as seen below. The charger LED will turn
red.
After the unit is fully charged the charger will turn green
again and you can unplug the unit.
*PLEASE NOTE* Do not leave the charger plugged in for
extended periods of time after it is  nish as it will ruin
the battery life and can possibly become a  re hazard.
Please note - You can charge the unit at any point of its usage. You do not need to let the unit run
fully down before charging it again and does not count as a full cycle of the battery.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Daymak BOOMERBEAST 2.0 STANDARD and is the answer not in the manual?

Daymak BOOMERBEAST 2.0 STANDARD Specifications

General IconGeneral
BrandDaymak
ModelBOOMERBEAST 2.0 STANDARD
CategoryScooter
LanguageEnglish

Related product manuals