EasyManuals Logo

Daymak BOOMERBEAST 2.0 STANDARD User Manual

Daymak BOOMERBEAST 2.0 STANDARD
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
Boomerbeast Operation (cont’d)
You will  nd above the ignition a display that will show you your metrics and performance for your Boomer-
beast.
Display
1) Speed - This display shows you how fast you
are going in km/h
2) Motor Power - This meter shows how much
power is being drawn from the motor. The
more power being drawn the faster the your
battery will drain.
3) Odometer - This shows how many kilome-
ters you have travelled on this unit.
4) Battery Meter - This shows how much
power you have left before you need to charge.
Once you start getting below 50% its advisory
to get to a charging station.
*PLEASE NOTE* The battery meter will dip
down when it starts and then go back up to
a steady power level. This is normal.
Boomerbeast D - Motor Switch
If you have the Boomerbeast D, on the left
handlebar you will also  nd a green switch like
the one to the right. This changes it from dual
or single motor.
Put this switch up to engage just the rear
motor or down to engage both front and
rear motors.
*PLEASE NOTE* The battery will draw expo-
nentially faster with both motors running
and all range estimates are for single motor
use only.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Daymak BOOMERBEAST 2.0 STANDARD and is the answer not in the manual?

Daymak BOOMERBEAST 2.0 STANDARD Specifications

General IconGeneral
BrandDaymak
ModelBOOMERBEAST 2.0 STANDARD
CategoryScooter
LanguageEnglish

Related product manuals