9
The Boomerbeast can be connected to via bluetooth to increase torque range and more.
You can download the app at www.daymak.com/app
Once the App is open, it will show you a list of the nearby bluetooth devices as well as the Front
and rear motor. Connect to the motor. For the fi rst time you connect, it will require you to input a
password: 12345678.
*Please note* To connect to the unit the Boomerbeast must be set to the ON position (see
Turning on your unit)
Once you have done that, a speedometer will show up and you are ready to go!
For more information on the Daymak Drive App, please refer to the quick guide seen here:
http://daymak.com/manuals/Daymak%20Drive%20Manual.pdf
Please note the Boomerbeast D has two controllers,
so any changes to e ect one motor, will not e ect the
other.
Most settings do not need to be tampered with, and should not be
changed before consulting the Bluetooth manual.
To Next Page
Loading...
Need help?
General