Daymak Boomerbuggy X User Manual

10
Driving your Boomerbuggy X (cont’d)
1) Lights - Press this button to turn the
ligths on and o .
2) Turn Signals - Push this button to the
right to use your right indicators and left
to use your left indicator. Push it to the
middle once completed the turn.
3) Horn - Press this button to honk the
horn.
4) Brake - Pull this lever towards you to
engage the brakes. This will start the
rear wheel brakes.
Left Handlebar
Engaging / Disengaging the Brake Lock
The Boomerbuggy X comes with a brake lock that prevents the unit from rolling when parked on an in-
cline.
To engage the brake lock, pulled the brake lever towards you. While holding the brakes close to you, pull
the parking brake lever seen below and pull it into the grooves of the brakes. Then release the brake.
To release the brake, pull the brake close to you and move the parking brake lever to its original position

Daymak Boomerbuggy X Specifications

General

Brand	Daymak
Model	Boomerbuggy X
Category	Scooter
Language	English