7
Alarm System / Remote
The Boomerbuggy X comes with two wireless remotes that activate / deactivate your alarm system re-
mote start your machine and more.
1) Disengage Igntion / Arm Alarm / Lock Unit - Press this but-
ton once so the push to start does not function and to turn on
the alarm system. After waiting 5 seconds, if anyone moves your
machine your alarm will activate. Always press this button when
the unit is o to prevent theft.
2) Engage Igntion / Disarm Alarm / Turn o Remote Start -
Press this button once to activate the keyless push to start but-
ton and to disarm the alarm or to stop the alarm if it is already
activated. This button doubles as the turn o button when the
remote start is activated.
3) Panic Button - Press this button to set o the alarm immedi-
ately.
4) Remote start - Press this button twice to turn on the ma-
chine without putting the keys in the ignition. Press the disarm
alarm button (2) once your trip is completed.
Lights
In addition to the headlights, the Boomerbuggy X comes with a LED light inside to help for visibility in-
side your cabin.
Push the switch to the right most position to turn o
the lights.
Push the switch to the left most position to turn on
the lights.
IMPORTANT - The Boomerbuggy X push to start is NOT activated by NFC (Near eld Communication)
which means if the remote control is left unlocked anyone can start the unit and drive away with it.
Always press the Lock button on your remote once nished using the Boomerbuggy X
To Next Page
Loading...
Need help?
General
