Daymak Roadstar Deluxe - Charging the EM4 (Direct); Accessing Your Circuit Breaker

15
Charging the Em4 (direct)
The Roadstar Deluxe comes with a lead acid ba ery pack that can be charged together
or individually. These can be done both in and out of the Mobility Scooter. To charge the
Roadstar Deluxe directly in the unit look for the charge port underneath the seat. It will
be covered with a  ap that you must li up and then plug the female end into that port.
Once the Mobility Scooter is charging the charger will glow red. When the unit is fully
charged the charger will glow green and then your Mobility Scooter is ready to go.
Warning
Do not leave the Roadstar Deluxe charging for long periods of  me a er it is fully charged.
Once the Mobility Scooter is charged unplug it ASAP.
Accessing your Circuit Breaker
To prevent surges, we have installed a circuit breaker.
If you are unable to get power to your Mobility
Scooter more than likely your circuit breaker has
been triggered and needs to be switched to the on
posi on.
To do this:
Unlock the seat, and li up the chair. (See next page
for more info)