Daymak Roadstar Deluxe - Technical Data; The Motor and Wheel Assembly; The Controller; The Brakes

25
Technical Data
This secon provides you with the technical specicaons for your Mobility Scooter.
The Motor and Wheel Assembly
The Roadstar Deluxe has a magnec DC brushless motor on the rear wheel hub. This type
of motor has excellent low-end torque and high eciency when working within its range.
Note that while the motor is very quiet, it does produce some noise. Also aached to the
rear hub are speed reducon gear and the speed free clutch..
The Controller
Daymak pioneered the development of intelligent component control in Mobility Scooters.
The Daymak Drive technology developed by Daymak is the brain of your Mobility Scooter.
It allows your Mobility Scooter to achieve faster acceleraon, to climb steeper hills, and
to save energy.
The electronic controller is located under the seat assembly. This controller eciently
regulates the speed and electronic funcons of the bicycle. It allows for stepless speed
adjustment, shuts o the motor when the brakes are acvated, has low voltage protecon
and has fuses to prevent excess current from damaging the Mobility Scooter’s systems.
This can all be regulated by Bluetooth app.
The Brakes
Front Brakes
The brakes on your mobility scooter are disc-brakes, like those found on gas scooters
and motorcycles. They generally provide for very ne stopping and control. This is a very
tested and well-designed technology, but even so, the brakes will require servicing from
me to me, and may have to be adjusted for tension.
The brakes are contained within a sealed unit, and are very nely adjusted and ed.
Rear Brakes
The rear brakes on your mobility scooter are drum brakes. These provide a good fricon-
grip when they are acvated and should be used rst before the front brakes.