Daymak Roadstar Deluxe - Page 19

19
Right handle bar
1. Kill Switch - Press this bu on towards N to put
the scooter in Neutral, push it towards start so that
the motor will go.
2. Light Switch - The far le posi on will have no
lights on. The middle posi on will have only the
brake lights on. The far le posi on will have all the
lights on.
3. Brake - Pull this lever to engage the front brakes
and stop power to the motor.
4. Thro le - Turn this towards you to engage the
motor and to go forward / backward.
5. 3 Speed Switch - Set it to posi on 1 for slowest
speed but furthest range. Set it to posi on 3 for
fastest speed and shortest range.
6. Forward and Reverse - Press this towards D to go
forward, R to go in reverse
7. Horn - Press this to honk the horn.
Left handle bar
1. MP3 / MPEG Controls - See next page for more
detailed informa on
2. USB Plug - See next page for more detailed
informa on
3. Horn - Press this to honk the horn
4. Turn Signals - Press this to the le to indicate
turning to the le . Press the middle white bu on
once the turn is complete.
5. High Beam / Low Beam - Press up to angle
your lights hight and press down to angle the
lights down.