8
Engaging Parking Brake
Underneath throttle there will be a small bar with a black nub covering it. This is to engage the parking
brake. To activate it, rst pull the rear brake caliper until it cannot go any further back.
Next, push the black nub up towards the handlebar to engage the rear brake lock.
Release the brake caliper and its set!
To disengage the parking brake, simply grab the rear brake caliper and pull it towards you again and the
parking brake will disengage and the bar will pop back out
Pull brake handle towards handlebar and push in the black nub
seen in the gures above and to the right.
To Next Page
Loading...
Need help?
General