Daymak WILD GOOSE 60V - ASSEMBLY GUIDE; CHARGING THE WILD GOOSE 60 V; CHARGING WARNING

15
Charging the wild goose 60v
First take the charger that came with your Wild Goose 60V and plug it into the the wall.
Once you have done that locate the charging port of the Wild Goose 60V located on the
le side of the frame near the pedals.
Once the bike is charging the charger will glow red. When the unit is fully charged the
charger will glow green and then your bike is ready to go.
Warning
Do not leave the Wild Goose 60V charging for long periods of me aer it is fully charged.
Once the bike is charged unplug it ASAP.
ASSEMBLING the wild goose 60v
To assemble the Wild Goose 60V remove all the zip es and styrofoam and unfold it as
seen in the folding secon. Insert the handlebars into the handlebar colum and the seat
post into the seat column.