Daymak WILD GOOSE 60V - PEDAL ASSIST SYSTEM; TIRE SPECIFICATIONS

19
Pedal assist
The Wild Goose 60V comes with a pedal assist function that automatically gives power
to the bike as you pedal. Depending on the level of pedal assist depends on the power
given from the motor.
Level 0 - No Pedal Assist / Throttle Mode - **0 PAS must be turned on in the advanced
settings**
Level 1 - Lowest level of pedal assist - Use this for the Maximum Range.
Level 5 - Highest Level of Pedal Assist - Use this for the Minimum Eort.
The pedal assist settings can be altered to remove 0 level of pedal assist, or change it The pedal assist settings can be altered to remove 0 level of pedal assist, or change it
from 5 levels of PAS to 3. To do so, please check the Advanced display settings. from 5 levels of PAS to 3. To do so, please check the Advanced display settings.
Tires
On each re you will nd a valve with a cap as seen here. Unscrew the cap and ll the res
with a pump to 15 - 30 PSI (20 recommended)