y
Manual Recording
Turn on Record Switch, it will record automacally all the me.
y
Alarm Recording
When moon detecon is triggered, the app will start recording, auto-
macally.
y
Scheduled Recording
Seng a me range that you want to record video.
Playback: Click the icon and you will see the videos save in the App .
Setting Guest Password: Click setting → security settings → guest pass-
word → Apply.
If you want to delete the guest password, reset the camera, and guest
password will be blank.
3.2 Wireless Connecon (Smartlink)
NOTE:
y
Do not connect the camera with router via Ethernet cable.
3.2.1 Make sure your smart phone is connected to your wireless
router. (Support 2.4G, Not support 5G.)
3.2.2 Run the Yoosee APP on your smart phone, connect the camera
with power adapter, and wait for a moment, unl the camera
plays a sound “di-di-di” press “hear connecon prompt”, then
input Wi name and original password.
3.2.3 Aer adding IP camera succefully, as shown:
NOTE:
y
Please ensure camera and phone use the same wireless router,
aer connecon you can view camera remotely on phone by dif-
ferent wi or 2.4G, not support 5G.
y
If you fail to add your camera to smart phone for several mes,
please reset the camera.
y
For other people want to access the IP Camera, just refer to above
3.1.5 instrucons: manual add, then input ID/password.
y
If the device can not connect successfully for 15 seconds, pull
down the device name to refresh.
4
Access the IP Camera
Once succeeding in connecng your camera, you can access it via Yoosee
App.
Two-way audio chatting: keep press the mic
to speak, re-
lease buon when nish talking.
Record Video: the camera can record video by phone or computer.
Record video on computer: please refer to below Computer operating
guide.
Record video on phone: insert a TF card on the camera and start seng as
below photo:
Recording seng → choose Recording models (there are 3 models avail-
able).
To Next Page
Loading...