To Next PageTo Next Page
Need help?Do you have a question about the Dayton B652 and is the answer not in the manual?
Details the B652 model, a 2-way general purpose speaker with black Ebony Pica vinyl finish.
Lists impedance (6 ohms), frequency response (70 Hz-20 kHz), and sensitivity (87 dB 1W-1M).
Specifies woofer (6-1/2" polypropylene), tweeter (5/8" polycarbonate), and overall size.
Guidance on using quality wire, proper phasing with red/black terminals, and wire marking.
Advice on speaker positioning for optimal off-axis response, dispersion, and bass perspective.
Recommendations for maintaining the speaker finish and cleaning grilles.
Discussion on amplifier compatibility, distortion as a damage indicator, and volume control settings.
Details the B652 model, a 2-way general purpose speaker with black Ebony Pica vinyl finish.
Lists impedance (6 ohms), frequency response (70 Hz-20 kHz), and sensitivity (87 dB 1W-1M).
Specifies woofer (6-1/2" polypropylene), tweeter (5/8" polycarbonate), and overall size.
Guidance on using quality wire, proper phasing with red/black terminals, and wire marking.
Advice on speaker positioning for optimal off-axis response, dispersion, and bass perspective.
Recommendations for maintaining the speaker finish and cleaning grilles.
Discussion on amplifier compatibility, distortion as a damage indicator, and volume control settings.
General| Woofer Size | 6.5 inches |
|---|---|
| Impedance | 6 ohms |
| Sensitivity | 87 dB |
| Type | Bookshelf |
| Tweeter Size | 0.625 inches |
| Frequency Response | 70 Hz - 20 kHz |
| Power Handling | 40 watts RMS |
