Need help?Do you have a question about the Daytona ANIMA 190FSM and is the answer not in the manual?
Critical safety warning stating the engine is for competition use only on closed courses.
Details failures not considered product defects, including overheating and improper maintenance.
Strict warning to maintain engine oil temperature below 90°C (194°F) to prevent severe damage.
Outlines customer responsibilities for operation, maintenance, and obtaining service from authorized dealers.
Provides engine weight, type, displacement, bore, stroke, compression ratio, and starting system.
Details the lubrication system, recommended engine oil, and oil capacity for periodic and full changes.
Specifies spark plug type, gap, and details the clutch type as wet, multi-plate 6-disc.
Covers transmission type, gear ratios, shift pattern, ignition system, and generator system.
Provides warp limit for cylinder head and bore size/out-of-round limits for the cylinder.
Details camshaft drive method and dimensions for intake and exhaust camshafts.
Specifies timing chain link count, adjustment, and valve clearance for intake and exhaust.
Lists valve dimensions (head, face width, seat width, margin) and free length for valve springs.
Details piston-to-cylinder clearance, piston size, and specifications for top, 2nd, and oil rings.
Provides crankshaft width, runout limit, side clearance, and small end free play.
Details friction plate thickness, quantity, clutch plate thickness, warp limit, and spring free length.
Specifies intervals for engine oil replacement/inspection and valve clearance checks/replacement.
Outlines intervals for valve springs, camshafts, and timing chain/sprockets inspection and replacement.
Details intervals for piston inspection, cleaning, replacement, and piston ring inspection/replacement.
Specifies intervals for cylinder head/cylinder inspection, cleaning, and replacement.
Details intervals for clutch inspection, adjustment, replacement, and transmission inspection/replacement.
Covers intervals for carburetor, shift components, rotor nut, and crank inspection and maintenance.
Specifies intervals for spark plug, oil filter, oil strainer, and air filter inspection/replacement.
Details intervals for checking oil cooling system hoses and replacing hoses/gaskets.
Warning regarding adding oil, especially when an oil cooler is installed, to maintain proper level.
Explains how air temperature, humidity, and pressure affect mixture settings for optimal performance.
Emphasizes controlling oil temperature below 90°C and recommends oil coolers and gauges.
General| Fuel System | Carburetor |
|---|---|
| Ignition | CDI |
| Lubrication System | Wet sump |
| Engine Type | 4-stroke, Single cylinder, 4-valve |
| Transmission | 5-speed |
To Next Page
