Dazon Raider Max 250S - Detailed Pre-Drive Inspection List; Essential Fluid and Component Checks; Fasteners, Safety Features, and Lights

Raider Max 250(single/double-seat) : Owner’s Manual Version:1.0 Oct. 2005
29
B. Pre-Drive Inspection
a. Engine Oil: Check for the engine oil level, and add oil if required; check for oil leaks.
b. Fuel: Check for the fuel level, and add fuel if necessary (but don’t overfill); check for fuel leaks.
c. Brakes: Depress the rear brake pedal several times to see if it works properly, and check for the proper
free play of brake pedal; adjust the brake pedal if necessary. Make sure there is no brake fluid leakage.
d. Tires: Check the tire conditions and pressures.
e. Drive Chain: Check for the chain conditions and tension; lubricate it if necessary.
f. Throttle: Check for the smooth operation; assure that the throttle "snaps" back to the idle position.
g. Engine Stop Button: Perform the engine stop button test; repair it if necessary.
h. Nuts, Bolts & Fasteners: Check all the nuts, bolts and other fasteners to see if they have been tightened to
the specified condition; adjust them if necessary.
i. Roll Cage Bar: Ensure that all the protective roll cage bars are in place.
j. Brake Light: Check for the proper operation of brake light.
z Perform this pre-drive inspection every time before driving your BUGGY.
z If not, serious dama
g
es to
y
our BUGGY or
p
ersonal in
j
uries to
y
ourself ma
y
be caused.