Dazon Raider Max 250S - Repair Procedures; Front Wheel Replacement; Rear Wheel Replacement

Raider Max 250(single/double-seat) : Owner’s Manual Version:1.0 Oct. 2005
50
REPAIRS
A. Front Wheel Replacement
Don’t disassemble the castle nuts when replacing the front wheels.
It is only necessary to tighten the nuts so that the wheels turn freely
on the axle with minimum endplay. Tighten the nuts after replacing
the wheels.
B. Rear Wheel Replacement
Don’t disassemble the castle nuts M8 when replacing the rear wheels.
It is only necessary to tighten the nuts so that the wheels turn freely on
the axle with minimum endplay. Tighten the nuts M5 and put on the
cotter pins after replacing the wheels.