Raider Max 250(single/double-seat) : Owner’s Manual Version:1.0 Oct. 2005
39
I. Running-In of the New Engine
The running-in distance is 1000km. During this period, please follow the instructions below:
(1) Run the engine according to the requirements specified;
(2) Rotate the throttle slowly after starting the engine; don’t speed up or speed down suddenly;
(3) Drive on smooth roads; don’t drive uphill or on rough roads for a long time;
(4) Keep the oil lines smooth;
(5) Avoid speeding up suddenly or running the engine at a high speed without loading;
(6) Maintain your vehicle according to the service intervals, and if necessary, repair it as soon as possible;
(7) After the running-in period, clean the crankcase and replace the oil; remove the carbon on the top of the
piston and in the combustion chamber; adjust the spark plug electrode gap and valve clearance; check if
the oil lines are smooth; maintain your whole vehicle according to the requirements specified in this
Owner’s Manual.
To Next Page
Loading...