A dialog box (similar to the illustration below) will appear advising that you may have to
restart your computer after installing the software, click "Ye s " to continue. Your Macintosh
will then begin performing the installation and a status bar will appear displaying the
progress of the installation.
NOTE: The actual driver installation should take only a few seconds.
A final dialog box will appear advising that the software was successfully installed.
Click "Restart."
Congratulations! Driver installation is now complete. You may now connect the Dazzle
6 In 1 Reader to your computer after restarting. Proceed to the next page for instructions
on connecting the Dazzle 6 In 1 Reader.
USER'S
MANUAL
USER'S
MANUAL
9
5.
6.