To Next PageTo Next Page
Need help?Do you have a question about the dB Technologies B-HYPE 10 and is the answer not in the manual?
Details the contents of the B-HYPE 10 box, including the speaker, mains cable, and documentation.
Explains speaker features like handles and pole mount, with a critical safety warning about suspension.
Connects audio input, sets sensitivity for Mic/Line, and adjusts volume to maximum for initial setup.
Details how to connect a second B-HYPE 10 using the link output, ensuring correct settings.
Guides on choosing between 'Flat' and 'Boost' DSP presets for frequency equalization.
Instructions for plugging in the mains cable and turning on the power, followed by gradual volume increase.
Details on speaker type, frequency response, SPL, driver, amplifier class, power, and operating voltage.
Information on the controller, limiter, and user interface controls like volume and DSP preset.
Covers mains connections, signal inputs/outputs, housing material, grille, pole mount, and dimensions.
Specifies power consumption at various usage levels (1/8, 1/3 power) and idle state.
Details the equipment's electromagnetic environment suitability and FCC Class B compliance.
Crucial safety advice regarding secure installation, avoiding stacking, and outdoor use precautions.
Details the contents of the B-HYPE 10 box, including the speaker, mains cable, and documentation.
Explains speaker features like handles and pole mount, with a critical safety warning about suspension.
Connects audio input, sets sensitivity for Mic/Line, and adjusts volume to maximum for initial setup.
Details how to connect a second B-HYPE 10 using the link output, ensuring correct settings.
Guides on choosing between 'Flat' and 'Boost' DSP presets for frequency equalization.
Instructions for plugging in the mains cable and turning on the power, followed by gradual volume increase.
Details on speaker type, frequency response, SPL, driver, amplifier class, power, and operating voltage.
Information on the controller, limiter, and user interface controls like volume and DSP preset.
Covers mains connections, signal inputs/outputs, housing material, grille, pole mount, and dimensions.
Specifies power consumption at various usage levels (1/8, 1/3 power) and idle state.
Details the equipment's electromagnetic environment suitability and FCC Class B compliance.
Crucial safety advice regarding secure installation, avoiding stacking, and outdoor use precautions.
General| Speaker Type | Active |
|---|---|
| Max SPL | 126 dB |
| HF | 1" |
| Tweeter Size | 1" |
| LF | 10" |
| Woofer Size | 10" |
| Amplifier Class | Class D |
| Cooling | Convection |
| Crossover Frequency | 2.5 kHz |
| Output | XLR |
| Weight | 12 kg |
| Bluetooth | No |
| Input | XLR |
| Inputs | XLR, 6.3mm Jack |
| Outputs | XLR |
| Housing | PP |
