Do you have a question about the dB Technologies LVX 10 and is the answer not in the manual?
Describes balanced/unbalanced inputs, link connectors, and ready/signal indicator lights.
Explains limiter indicator, sensitivity control, and input sense switch.
Details the mode switch, power cable socket, fuse carrier, and power switch.
Explains the amplifier switch-on procedure, LED indicators, and types of failure warnings (warning, limitation, failure).
Warnings and guidelines for secure installation, checking components, outdoor use, and hanging points (eyebolts).
Warnings regarding component checks before hanging and secure installation of components.
Describes balanced/unbalanced inputs, link connectors, and ready/signal indicator lights.
Explains limiter indicator, sensitivity control, and input sense switch.
Details the mode switch, power cable socket, fuse carrier, and power switch.
Explains the amplifier switch-on procedure, LED indicators, and types of failure warnings (warning, limitation, failure).
Warnings and guidelines for secure installation, checking components, outdoor use, and hanging points (eyebolts).
Warnings regarding component checks before hanging and secure installation of components.
| Speaker Type | Active |
|---|---|
| Type | 2-way |
| Frequency Response | 50 Hz - 20 kHz |
| Max SPL | 126 dB |
| Woofer Size | 10" |
| LF | 10" |
| Tweeter Size | 1" |
| HF | 1" |
| Amplifier Class | Class D |
| Cooling | Convection |
| Output Connector | XLR |
| Width | 310 mm |
| Height | 550 mm |
| Weight | 11.5 kg |
| Input Connector | XLR, Jack |
| Housing | Polypropylene |












Loading...