EasyManua.ls Logo

dB Technologies DVA S1518N - Page 7

dB Technologies DVA S1518N
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EnglishEnglishEnglish
user manualuser manual
12
DESCRIPTION
DVA S1518N
The DVA S1518N is equipped with one high efficiency
amplifiers DIGIPRO 1500S of DIGIPRO® G2 series,
which delivers 1500W RMS.
The power supply circuits of the DIGIPRO® G2
amplifier has been conceived to work in full-range
mode; thanks to the SMPS (Switched-Mode Power
Supplies) technology with PFC (Power Factor
Correction) the operation with supply voltages
between 100 Vac and 240Vac is guaranteed by
ensuring the same sound performances even with
floating and non-stabilized power supply systems.
The digital preamplifier with DSP (Digital Signal Processing) controls the audio crossover
of the acoustic components, the frequency response and the limiter.
The box of the subwoofer DVA S1518N is made from birch wood, designed for medium to
large environments, with a "BAND PASS" solution which allows to obtain high sound
pressure and a low bass.
The subwoofer has a rectangular shape; at the top there is a pedestal support M20 and it is
provided with 6 metal handles (3 for each side).
At the top there are as well two inserts, to fasten (groundstack) the flybars DRK10 or
DRK20, for the speakers DVA T4, DVA T8 and DVA T12.
The speaker can also be hung to the flybars DRK10 or DRK20 through the optional
bracket kit SRK-10.
To facilitate the transport you can fit 4 wheels (diameter 100mm) to the rear, (KIT SWK-18)
or use the appropriate dolly fastened with two PINs (DVA S1518N and DVA S2585N dolly).
11
EnglishEnglishEnglish
user manualuser manual
D O W N L O A D
D O W N L O A D
D O W N L O A D

Related product manuals