dB Technologies DVA T12

Need help?

Do you have a question about the dB Technologies DVA T12 and is the answer not in the manual?

Summary

SYSTEM SOFTWARE AND CONNECTIVITY

DVA Network

Proprietary network interface for PC connection and parameter monitoring.

DVA USB Manager

Software for updating amplifier module firmware via USB port.

DVA Composer

2D software for acoustical simulation and aiming of DVA systems.

CONTROLS AND FUNCTIONS

Balanced Audio Connectors

Describes balanced audio input and output connectors.

Status Indicators

Details the limiter, signal, mute/prot, and ready indicator lights.

Input Sensitivity Control

Adjusts the sensitivity of the signal amplifier input.

RDNET Interface

Covers RDNET data input/output connectors and status indicators.

DSP CONFIGURATION

Remote Preset and DSP Preset Controls

Details the remote preset indicator and DSP preset rotary switch.

Service and Optional Connectors

Describes USB connector for service data and optional device connector.

Power Connections

Details mains input, output link power sockets, and fuse carrier.

CHARACTERISTICS AND PROTECTION

Unit Protection and Cooling

Details the front grille, thermal management, and volume reduction features.

Power-On and Failure Safeties

Explains the power-on sequence, failure indications, and safety measures.

Mains Power Connection

Describes connecting and linking speakers to the mains supply.

TECHNICAL SPECIFICATION

System and Power Specs

Details system type, amplifier technology, and power ratings.

Audio and Input Specs

Covers frequency response, crossover, SPL, input sensitivity, and impedance.

Power Supply and DSP Details

Includes power supply, inrush current, DSP processor, and equalization specs.

Mechanical Construction and EMI

Describes box material, reinforcement, housing, and EMI classification.

DIMENSIONS

BLOCK DIAGRAM

SAFETY INSTRUCTIONS FOR ACCESSORIES