EasyManua.ls Logo

dB Technologies IEM 2200 - Receiver Specifications; System Specifications

dB Technologies IEM 2200
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
Receiver
Power: 9V alkaline battery
Battery life: 6,5 to 8 hours depending upon volume
Earpiece output: 250 mW / 16 Ohms per channel
Distortion: <1%
Channel separation: 40dB @ 1kHz typical
Frequency response 30 Hz to 15kHz ~ 3dB
Signal to noise ratio 105dB typical measured in mono mode
100dB typical measured in stereo mode
Sensitivity < 2uV for 20dB SINAD
Operating frequency: 16 pre-programmed frequencies*
Antenna: Integral ¼ wave whip
Low battery warning: a flashing indication on the LCD panel alert the user to replace t
h
Muting: Soft mute circuits ensure no loud pops or other noises in low RF
situations. Silent shutdown in the event of loss of RF.
System
Frequency response: 50 Hz to 15 kHz ± 3dB
THD + Noise: < 1.0%
Signal to noise: > 100dB nominal
Compliance: ETS 300 422 & ETS 300 445

Related product manuals