67
INGENIA IG2T Cod. 420120238 REV. 1.1
5. UPDATING THE FIRMWARE
1. Download the USB BURNER MANAGER in the “SOFTWARE & CONTROLLER” section, then install it following
the relevant instructions
2. Download the .zip le of the latest rmware in the “DOWNLOADS” section for INGENIA IG2T
3. In the top right section of the USB BURNER MANAGER screen, select “File Opening”
4. Select the previously downloaded rmware le (verifying that it is appropriate for your operating system)
5. Click UPDATE
It is very important that you keep the product rmware always up-to-date, to ensure its full functionality.
Periodically check the Web site http://www.dbtechnologies.com, in the “DOWNLOADS” section. Once you verify
that a new rmware version is available:
ATTENTION!
When the rmware is updated the presence of the old saved settings
at the next switch-on is not guaranteed.
English
To Next Page
Loading...
