10
function of Parents unit is not available for use when Baby unit is turned off.
- When pressing the TALK key of Parents unit to talk to Baby unit, the music will be
stopped playing.
- Music playing is not interrupted by call ring tone.
E. Sensitivity Level Adjustment (Only for Baby unit)
SENSITIVITY slide switch is located in the battery compartment. Adjust different
detecting sound level sensitivity by switching the SENSITIVITY switch to either Lo
( normal sensitivity : 1-2 meters) or Hi ( high sensitivity : 2-6 meters) position.
Remarks : The default setting of sensitivity level is Lo.
F. Call Function
Both units can make a call ring tone to call one another.
1. Press PAGE key at the left side of the Parents unit or Baby unit one time to call another
unit,.
2. Three “BiBi” sound will be heard from Baby unit.
3. Each press PAGE key once, you will hear three “Bi Bi” sound. If no press PAGE key
again, the call ring tone will end.
Remarks:
- When Baby unit call Parents unit, only the Parents unit can be heard three “Bi BI”
sound.
- When Parents unit call Baby unit, only the Baby unit can be heard three “Bi BI” sound.
G. Low Battery Alert
When the unit is in low power, the details please refer to page 6 “Battery Charging” .
Remarks:
-- No low battery alert for Baby unit.
-- No transmission while Baby unit is in low battery.
H. Out of Range Alert (Only for Parents unit)
When the connection between Parents and Baby unit is broken , e.g.
- One of the units is turned off;
- The Baby unit is in low battery;
- The units are detected out of communication range (300m)
LCD version LED Indicator version
ParentsUnit
with “Di Di Di” alart sound will be
heard in every 2 seconds
with “Di” alert sound will be
heard in every 1 second
Red light
Flashing
To Next Page
Loading...