DBPOWER SBB-55210 - User Manual

Questions and Answers

R
ronaldalvarezAug 9, 2025
What to do if my DBPOWER SBB-55210 has no sound or sound is weak?
- D
  Donald AdamsAug 9, 2025
  If your DBPOWER Speaker System has no sound or the sound is weak, it might be due to several reasons: the volume level may be at the minimum, so raise the volume using the Vol + button on the unit or the remote control. Also, ensure the paired device is playing music/movie and its volume is high. Finally, the input source might be incorrect; switch to the desired mode using the STANDY/SOURCE button on the unit or the SOURCE button on the remote.
M
Mary ColemanAug 16, 2025
How to fix a DBPOWER SBB-55210 Speaker System remote control that is not functioning?
- S
  Sherri WolfeAug 16, 2025
  If the remote control for your DBPOWER Speaker System isn't working, try these steps: First, make sure you're within 16 feet of the unit and pointing the remote towards the infrared receiver, ensuring there are no obstructions. If that doesn't work, replace the batteries in the remote with new ones.
C
Christopher BurkeAug 21, 2025
Why DBPOWER SBB-55210 has no power?
- G
  garnoldAug 22, 2025
  If your DBPOWER Speaker System has no power, check if the adapter is properly connected to both the unit and the wall outlet. Also, the unit might be in standby mode. To power it on, press and hold the STANDY/SOURCE button on the unit or press the power button on the remote control.
D
Daniel TurnerAug 27, 2025
What to do if DBPOWER SBB-55210 Speaker System has sound distortion or rattle?
- K
  kyle53Aug 27, 2025
  If you're experiencing sound distortion or rattle with your DBPOWER Speaker System, the volume level might be too high. Try reducing the volume by pressing the Vol - button on the unit or the VOL- button on the remote control. Additionally, reduce the volume level of the paired device.
D
David JacksonSep 2, 2025
How to resolve Bluetooth reception failure on DBPOWER SBB-55210?
- J
  John MarshSep 2, 2025
  If you're experiencing Bluetooth reception failure with your DBPOWER Speaker System, ensure that the external device is close to the unit. Pair the unit with the Bluetooth device following the procedures outlined in this manual.