Need help?Do you have a question about the dbx 234XL and is the answer not in the manual?
General| Maximum Input Level | +22dBu balanced or unbalanced |
|---|---|
| THD + Noise | <0.004% at +4dBu, 1kHz |
| Power Requirements | 100-240 VAC, 50/60 Hz, 15W |
| Frequency Response | 20Hz - 20kHz, +0/-0.5dB |
| Crossover Slopes | 24dB/octave |
| Inputs | 2 x XLR, 2 x 1/4" TRS |
| Outputs | 6 x XLR |
| Filter Type | Linkwitz-Riley |
| Dynamic Range | > 106dB |
| Dimensions | 1.75" x 19" |
| Type | Stereo 2/3-way, Mono 4-way Crossover |
| Crossover Frequencies | Low/High: 45Hz to 960Hz, 450Hz to 9.6kHz; High/Mid: 45Hz to 960Hz, 450Hz to 9.6kHz |
Crucial safety advice regarding lithium battery handling and replacement risks.
Safety precautions for mains plug usage, including fuse and socket requirements.
Guidelines for device operation to avoid interference and ensure proper functioning.
Statement confirming product compliance with relevant safety and EMC directives.
Details regarding product warranty registration and coverage terms.
Overview of the dbx crossover product and its key features.
Instructions for checking the package contents and inspecting the unit upon arrival.
Details on front panel controls for the 234/234XL in stereo 2-way mode.
Details on front panel controls for the 234/234XL in stereo 3-way mode.
Details on front panel controls for the 234/234XL in mono 4-way mode.
Details on front panel controls for the 223/223XL in stereo 2-way mode.
Details on front panel controls for the 223/223XL in mono 3-way mode.
Guide to setting rear panel mode switches for desired operation.
Instructions for connecting audio sources and amplifiers to the rear panel.
Advice on connecting the unit to AC power sources safely and correctly.
Explanation of the X10 switch for extending crossover frequency ranges.
Description of the polarity invert switch for optimizing speaker phase alignment.
How the LF Sum switch combines low frequencies for mono subwoofer outputs.
Steps to troubleshoot when there is no audible sound from the unit.
Troubleshooting steps for distorted or unusual audio output signals.
Guidance for resolving weak or distorted audio signal problems.
Methods to identify and eliminate hum and buzz noise issues.
Solutions for intermittent audio signal dropouts or inconsistencies.
Detailed specifications for audio inputs, including connectors and impedance.
Detailed specifications for audio outputs, including connectors and impedance.
Technical performance metrics such as bandwidth, frequency response, and S/N ratio.
Specification of available crossover frequency points for different modes.
Explanation of the function and effect of various front and rear panel switches.
Description of the LEDs and their meanings during operation.
Details on operating voltage, consumption, and mains connection.
Specifications for the unit's physical size and weight.
To Next Page
