Need help?Do you have a question about the dbx 223 and is the answer not in the manual?
General| Output Impedance | 100Ω |
|---|---|
| Power Consumption | 15W |
| Frequency Response | 20 Hz to 20 kHz, +0/-0.5 dB |
| Filter Type | 24 dB/octave Linkwitz-Riley |
| Maximum Output Level | +21dBu |
| THD + Noise | <0.004% at +4 dBu, 1 kHz |
| Input Connectors | XLR |
| Input Type | Balanced or unbalanced |
| CMRR | >40dB, 20Hz - 20kHz |
| Output Connectors | XLR |
| Output Type | Balanced or unbalanced |
| Max Output | +21dBu |
| Interchannel Crosstalk | <-80 dB, 20 Hz to 20 kHz |
| Dimensions | 19" x 1.75" x 8.75" (483mm x 44mm x 222mm) |
Essential warnings and guidelines for user protection and safe operation.
Details on appliance earthing, wiring, and precautions for electrical safety.
Precautions for lithium battery handling and UK mains plug usage.
Information on the unit's compliance with electromagnetic interference standards.
Details on validating the warranty, liability, and manufacturer's rights.
Highlights common features of the 234/234XL and 223/223XL crossovers.
List of items expected inside the shipping carton for the crossover unit.
Detailed description of the front panel controls for the 234/234XL model.
Explanation of front panel controls active in stereo 2-way operation.
Explanation of front panel controls for stereo 3-way operation.
Explanation of front panel controls for mono 4-way operation.
Explanation of front panel controls active in stereo 2-way operation.
Explanation of front panel controls for mono 3-way operation.
Guidance on selecting operating modes using back panel switches.
Diagram and explanation of the 234XL rear panel connectors.
Diagram and explanation of the 234 rear panel connectors.
Diagram and explanation of the 223XL rear panel connectors.
Diagram and explanation of the 223 rear panel connectors.
Instructions for connecting source devices and amplifiers to the crossover.
Ensuring the crossover conforms to local AC power specifications.
Explains the function of the X10 switch for frequency range selection.
Details the polarity (Ø) reverse switch for phase tuning.
Describes the LF sum feature for mono subwoofer applications.
Guidelines for safely mounting the unit in racks and routing cables.
Steps to diagnose and resolve issues when no sound is present.
Steps to diagnose and resolve issues with distorted or weak audio.
Checks for weak or distorted audio signals.
Steps to diagnose and resolve hum or buzz issues.
Steps to diagnose and resolve intermittent audio signals.
Details on connectors, impedance, and maximum input/output levels.
Information on bandwidth, frequency response, and signal-to-noise ratio.
Lists available crossover frequencies for different modes and settings.
Details on front and rear panel switches and their indicator LEDs.
To Next Page
