Need help?Do you have a question about the dbx 223xs and is the answer not in the manual?
General| Number of Channels | 2 |
|---|---|
| Frequency Response | 20 Hz - 20 kHz, +0/-0.5 dB |
| Filter Type | Linkwitz-Riley, 24 dB/Octave |
| THD + Noise | <0.004% at +4 dBu, 1 kHz |
| Power Consumption | 15W |
| Type | Stereo 2-Way/Mono 3-Way |
| Output Impedance | 100Ω |
| Maximum Output Level | +21dBu |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Inputs | 2 x XLR |
| Outputs | 4 x XLR |
| Maximum Input Level | +22dBu |
| Crossover Frequencies | 45 Hz - 960 Hz (x1), 450 Hz - 9.6 kHz (x10) |
Essential warnings on product safety, electrical hazards, handling, and disposal to prevent injury or damage.
Details the unit's adherence to electromagnetic compatibility standards for interference reduction and reception.
Specific safety instructions regarding the UK mains plug, including fuse replacement and proper usage.
States compliance with various directives and regulations, including Low Voltage, EMC, and RoHS.
An overview of the crossover, highlighting its key features for audio applications.
Provides contact details for technical support and outlines the product warranty terms and conditions.
Details the front panel controls and their functions for the 234s/234xs models in various operating modes.
Explains the front panel controls and their operation for the 223s/223xs models in different stereo and mono configurations.
Guides users on selecting operating modes and understanding rear panel layout for 234s/234xs models.
Details the rear panel layout and connection points for the 223s/223xs models.
Provides step-by-step instructions for connecting audio sources and amplifiers to the crossover.
Instructions for safely connecting power and initial system startup sequence for optimal performance.
Explains the x10 switch function for extending the crossover frequency range from 45-960 Hz to 450 Hz-9.6 kHz.
Details the polarity switch and low frequency summing feature for optimizing sound and subwoofer integration.
Information on rack mounting, proper grounding, cable types, and overall safety considerations for installation.
Steps to diagnose and fix problems when there is no audio output or abnormal audio signals.
Strategies for resolving hum, buzz caused by interference, and intermittent audio signal problems.
Details connector types, impedance, signal levels, bandwidth, frequency response, and signal-to-noise ratio.
Technical data on output levels, dynamic range, distortion, and interchannel crosstalk performance.
Lists crossover frequency ranges and details function switches like Low Cut, Phase Invert, x10, Mode, and LF Sum.
Details power requirements, physical dimensions, weight, and mains connection for the device.
To Next Page
