Instruction manual VERI60 AIR COOLER WITH REMOTE CONTROL
dcg16.it
14
Operating Guide
• Avoid using the evaporative air cooler in a closed area. The unit should
be used in well- ventilated areas only.
• Before turning the unit on, ll the tank with water to ensure efcient
operation of the evaporative air cooler.
Remarks: Water level must not exceed the limit of water level scale.
• Drain the water tank and clean the water tray frequently (at least once
a month)
• Fill the tank with clean water only, do not put any other liquid into the
tank.
• Make sure that the operating voltage is not lower than regular voltage
(220 V) or exceed than 5% of regular voltage. If the voltage is lower
than the limit, the air cooler cannot be operated smoothly or even
turned on. If the voltage is higher than the limit, it can cause the
damage to the machine.
• Remove the plug from the socket when the machine is not being used.
Cautions
• Be careful the water spilled out while moving the unit
• Do not put anything on top of this air cooler or obstruct the air inlet
and outlet
• Do not insert any object into the vent while the machine is operating
• Unplug the machine before cleaning to prevent the electric shock
• if you will not use the unit for long time, please make sure that you use
up the water or drain all water out.
• Stop operating this air cooler immediately if it functions abnormally
for example the power cord damaged, electricity leaks, and contact
our service center for further instruction. User is not recommended to
unassembled and repair the machine.
To Next Page
Loading...
