13
OVEN USE
To insert the shelves - SECONDARY OVEN (48” models only)
1 Make sure the guard rail is at the back,
facing up.
3 Tilt the front up slightly to help the
safety stops clear the side rack wires.
4 Lower the shelf back onto the side rack
wires and slide all the way into the oven.
To remove the shelves
1 Wait for the oven to cool down completely.
2 Pull the shelf forward about ¾ of the way.
3 Tilt the front up slightly to help the safety stops clear the side rack wires.
4 Remove the shelf.
2 Position the shelf: it should rest on the
side rack wires, as shown.
Guard rail
Side rack wire
Safety stop
To Next Page
Loading...
