Need help?Do you have a question about the ddtop UQZ and is the answer not in the manual?
General| Brand | ddtop |
|---|---|
| Model | UQZ |
| Category | Transmitter |
| Language | English |
Guarantees no defects in materials and manufacturing within one year.
Dandong Top Electronics Instrument Co.,Ltd. has passed ISO9001 quality system certification.
Installing equipment in explosive atmosphere requires following applicable standards and procedures.
Care should be taken to lift the transmitter; leaks may occur at the joint if the seal is damaged.
Operations must be performed by professionally trained and qualified professionals.
Describes the basic structure of the UQZ magnetic float level transmitter with a diagram.
Details explosion-proof certification marks (Ex ia, Ex d) for the transmitter.
Lists key specifications like range, flange standard, nominal diameter, pressure, and wetted material.
Refers to a chart (Figure 2) showing load characteristics for the transmitter.
Presents a diagram (Figure 3) showing the physical dimensions of the transmitter.
Instructions on checking product nameplate consistency and packing list.
Verifying the appearance of the instrument for defects or damage.
Lists necessary tools like wrenches, flange gaskets, and bolts for installation.
Specifies requirements for smooth float ball surface and perpendicular housing axis.
Outlines the steps for connecting the transmitter flange to the process vessel.
Provides a step-by-step guide for configuring transmitter parameters using the keys.
Instructions on how to set the unit of measurement (m, cm, mm, feet, inch).
Guides the user through setting the Lower Range Value (LRV).
Details the process for calibrating the Lower Range Value (LRV) and Upper Range Value (URV).
Warning about medium temperature and confirming safe power supply connection.
Notes unsuitability for high vibration, high viscosity media, and strong magnetic fields.
Recommends tightening the power cover after debugging to prevent moisture ingress.
Lists reasons and exclusion methods for display and remote transmission issues.
Advises caution regarding hazardous process conditions during disassembly.
States that waste disposal must follow current regional guidelines.
Lists EMC certification details, including CE mark and certification number.
Details Intrinsically Safe and Explosion Isolation certifications.
Mentions formal approval certification with PA mark and number.
To Next Page