Need help?Do you have a question about the De Nora MIOX AE8 and is the answer not in the manual?
General| Brand | De Nora |
|---|---|
| Model | MIOX AE8 |
| Category | Portable Generator |
| Language | English |
Discusses compliance with EPA, NSF, and state regulations.
Specifies the minimum floor space needed for the generator, brine, and oxidant tanks.
Details requirements for installing equipment in a protected and secured structure.
Outlines necessary specifications for salt and water to ensure proper system function.
Lists and describes key components like the electrolytic cell and water softener.
Explains the need for temperature control for the electrolytic cell.
Describes an optional system to ensure adequate water pressure for operation.
Instructions for installing the control panel, including mounting strut and panel attachment.
Guides on how to remove and install the electrolytic cell onto the mounting panel.
Details electrical connections required for system startup.
Outlines necessary plumbing connections for system installation.
Instructions for installing the optional brine generator system.
Guides for the proper installation of the oxidant storage tank.
Instructions for installing the liquid level switch in the oxidant tank.
Details connections for the oxidant tank lid, feed line, and overflow port.
Verifies that the correct AC power is supplied to the unit.
Step-by-step guide for filling the brine generator with salt and water.
A checklist of items to verify before initial system startup.
Ensures the water softener functions correctly before OSG startup.
Details the process of starting up the AE System controls.
Describes the normal operating sequence and display screens.
Explains the initial mode when the system powers on and performs a flush.
Details the status and parameters displayed during normal operation.
Explains when the system enters standby and what is displayed.
Identifies common hard faults, their causes, and displays.
Outlines the checks to perform daily for system upkeep.
Details the inspection and checks required on a weekly basis.
Lists the maintenance tasks to be performed monthly.
Specifies the maintenance activities for a quarterly schedule.
Outlines the tasks for annual system maintenance.
Provides guidance on properly storing the system when not in use.
Instructions for replacing the brine peristaltic pump.
Explains the function and maintenance of the rupture disk.
Step-by-step guide for replacing the rupture disk diaphragm.
Details the procedure for acid washing the electrolytic cell.
Lists the necessary equipment for performing oxidant demand tests.
Guides on how to determine the initial test range for oxidant demand.
Explains how to calculate volumes for oxidant demand testing.
Step-by-step instructions for conducting the oxidant demand test.
How to interpret test results to determine water's oxidant demand.
Details how to measure the volumetric flow rate of the system.
Provides formulas to calculate total daily chlorine production.
Lists acceptable limits for various water quality parameters.
Specifies purity requirements for salt used in the system.
Provides the electrical wiring diagram for the AE Series system.
Presents a template for logging system operational data.
Offers guidance for the maintenance of the brine peristaltic pump.
To Next Page
