De Rosa DRM312 - Set Up the Drum Throne Seat; Perform Final Drum Kit Adjustments

8) Set Up the Seat
We save the best for last.
Find the SEAT TOP (TO) and the SEAT STAND (TH) Make sure the wing
nuts on the SEAT STAND (TH) are loose and slowly pull the tripod legs
until the stand is in a stable position, Securely tighten the wing nut,
You can adjust the seat height using the neck of the stand. Loosen the
wing nuts and place the neck at the desired height and tighten securely.
Place the SEAT TOP (TO) onto the neck of the stand and tighten securely.
9) The Final Adjustments
You are done with the assembly and now you can make any final adjustments that best suit the drummer.
Have the drummer sit on the SEAT and make sure their feet are on the ground and that they are able to reach
the BASS PEDAL. Make sure the drummer is able to reach the TOM TOM and CYMBAL.
Make any adjustments that are necessary and let them rock out.
1 Drum Key (K)
12 Plastic Washers (W)
12 Metal Clasps (C)
12 Lug Bolts (L)
2 Spurs (S)
1 Cymbal Arm (CA)
1 Seat Stand (TH)
1 Upholstered Seat (TO)
1 Pair of Drum Sticks
1 Bass Drum Head with Logo (H)
1 Bass Drum Head Plain (H)
1 Bass Drum Shell (A)
2 Bass Drum Rims (R)
2 Tom Tom Arms (TA)
1 Tom Tom Drum (T)
1 Snare Drum (SD)
1 Cymbal (CY)
1 Bass Pedal (P)