6
OPERATION:
• Caution: There may be some odour coming from the heater for the very rst time you use
it. This is normal during the break-in period or after long term storage. Make sure the
heater is in well ventilated area and continue running it until the smell goes away.
Please follow the instructions given below
1. Check if the On/OFF Power switch is along the side of the
heater is at OFF position.
2. Plug the heater into a 10 ampere wall socket.
3. Press the On/Off Power Switch along side of the heater to
ON position to turn the heater ON.
PAINTING PANEL:
This unit maybe painted to suit decor using water based paints only,
rated at 120°C and above.
To Next Page
Loading...