Deaf Bonce APOCALYPSE ATOM 1300.1 PRO - User Manual

Avoid engine compartments and areas exposed to water, moisture, dust, or dirt.

Select power cable diameter per amplifier power for damping factor and sound quality.

Connect positive (+) amplifier terminals to positive battery cables and negative (-) to negative.

Place fuse holder within 40 cm of the positive battery terminal; do not install fuses yet.

Verify all connections are correct before installing fuses; use bulb test for polarity.

Connect the positive power cable from the battery's (+) terminal to the amplifier's +12V terminal.

Connect the grounding cable from the battery's (-) terminal to the amplifier's GND terminal.

Check contacts, 9-15V supply, and REM IN signal for proper operation.

Check for output short circuits, correct subwoofer voice coil impedance, and supply voltage.

Verify amplifier connections, interconnect cable integrity, and speaker/subwoofer function.